Dilution Calculator (C₁V₁ = C₂V₂)
Find how much stock solution to dilute, the final volume, or the resulting concentration using C₁V₁ = C₂V₂. Use any units, as long as they match on both sides.
| Result | V₁ = 62.5 mL |
|---|---|
| Solvent to add | 187.5 mL (dilution factor 4×) |
| Working | V₁ = 0.5 × 250 ÷ 2 = 62.5 |
Link to this calculation – copied!
Formula
V1 = C2V2 ÷ C1
| Symbol | Meaning |
|---|---|
| C1 | Concentration of the stock solution |
| V1 | Volume of stock solution used |
| C2 | Concentration of the diluted solution |
| V2 | Final volume of the diluted solution |
How to Use This Calculator
- Choose the Solve for (Stock volume (V₁), Stock concentration (C₁), Final volume (V₂), Final concentration (C₂)).
- Enter the Stock concentration (C₁). Any concentration unit, e.g. M, mg/mL or %.
- Enter the Stock volume (V₁) when Solve for is Stock concentration (C₁) or Final volume (V₂) or Final concentration (C₂). Any volume unit, used for both volumes.
- Enter the Final concentration (C₂). Same unit as C₁.
- Enter the Final volume (V₂). Same unit as V₁.
- Press Calculate. Results also update automatically as you type.
Worked Example
Using the values pre-filled in the calculator above:
| Solve for | Stock volume (V₁) |
|---|---|
| Stock concentration (C₁) | 2 M |
| Final concentration (C₂) | 0.5 M |
| Final volume (V₂) | 250 mL |
| Result | V₁ = 62.5 mL |
|---|---|
| Solvent to add | 187.5 mL (dilution factor 4×) |
| Working | V₁ = 0.5 × 250 ÷ 2 = 62.5 |
About This Calculation
Diluting a solution adds solvent but leaves the amount of dissolved substance unchanged. Since amount equals concentration times volume, the product C × V is the same before and after: C₁V₁ = C₂V₂. To make 250 mL of 0.5 M acid from a 2 M stock, you need 62.5 mL of stock, made up to 250 mL with 187.5 mL of water.
The equation works with any units provided each pair matches: both concentrations in M, mg/mL or percent, and both volumes in mL or L. The labels here show M and mL, but a calculation in g/L and liters gives the correct answer just the same. The dilution factor, C₁ ÷ C₂, tells you how many times weaker the new solution is; serial dilutions multiply these factors together.
Remember that V₂ is the total final volume, not the volume of water to add; the calculator shows the solvent volume separately. Volumes of some mixtures are not strictly additive (ethanol and water shrink slightly when mixed), so for accurate work fill to the mark in a volumetric flask. When diluting concentrated acids, always add acid to water, not water to acid, because the heat released can make it spatter. For making the stock in the first place, see the molarity calculator.
Frequently Asked Questions
- Can I use percent concentrations in C₁V₁ = C₂V₂?
- Yes. Any concentration unit works if both C₁ and C₂ use it. Diluting 70% alcohol to 35% halves the concentration and doubles the volume.
- What is a dilution factor?
- The ratio of the stock concentration to the final concentration (or final to initial volume). A 1:10 dilution, for example 1 mL of stock in 10 mL total, has a dilution factor of 10.
- How do I do a serial dilution?
- Repeat the same dilution several times, using each new solution as the stock for the next. Three successive 1:10 dilutions give an overall factor of 1,000.