Free online formula calculators

Cone Volume Calculator

Enter the base radius and vertical height of a cone to calculate its volume, slant height and surface areas.

Cone Volume Calculator
Result
Volume150.7964 cubic units
Slant height9.8489
Lateral surface area123.7644 sq units
Total surface area174.0299 sq units

Link to this calculation

Formula

V = ⅓ × π × r2 × h
l = √(r2 + h2)
A = πr2 + πrl
SymbolMeaning
rRadius of the circular base
hVertical height from base to tip
lSlant height along the side

How to Use This Calculator

  1. Enter the Base radius (r).
  2. Enter the Height (h). Perpendicular height, not the slant height.
  3. Press Calculate. Results also update automatically as you type.

Worked Example

Using the values pre-filled in the calculator above:

Inputs
Base radius (r)4
Height (h)9
Results
Volume150.7964 cubic units
Slant height9.8489
Lateral surface area123.7644 sq units
Total surface area174.0299 sq units

About This Calculation

A cone has exactly one-third of the volume of a cylinder with the same base and height. You can see this by filling a cone with water and pouring it into the matching cylinder: it takes three cones to fill it. The same one-third rule applies to every pyramid-like shape that tapers to a point, whatever the shape of its base.

Two heights are involved and they are easy to confuse. The vertical height h runs from the tip straight down to the center of the base and is used for volume. The slant height l runs along the sloping side and is used for surface area; it is always longer than h. If you only know the slant height, the vertical height is √(l² − r²). The lateral area excludes the circular base, which is what you want for an open shape such as an ice-cream cone or a funnel.

Cone calculations are used for estimating the volume of piles of gravel, sand, grain or salt (which settle into cones), sizing hoppers and funnels, cutting paper or sheet-metal cones, and working out the capacity of conical tanks and party cups. For a truncated cone (frustum), subtract the volume of the small cone that has been cut off the top. Related shapes are covered by the pyramid and cylinder calculators.

Frequently Asked Questions

How do I estimate the volume of a gravel pile?
Measure the distance around the base and divide by 2π to get the radius, then estimate the height and use V = ⅓πr²h. Divide cubic feet by 27 to get cubic yards.
Does the formula work for an oblique cone?
Yes for volume, as long as h is the perpendicular height from the tip to the plane of the base. The surface-area formulas here apply only to a right cone.

Category: Geometry. Found a problem with this calculator? Let us know.