Free online formula calculators

Cylinder Volume Calculator

Enter the radius (or diameter) and height of a cylinder to find its volume and surface areas.

Cylinder Volume Calculator
Result
Volume282.7433 cubic units
Lateral surface area188.4956 sq units
Total surface area245.0442 sq units
Base area28.2743 sq units

Link to this calculation

Formula

V = π × r2 × h
Lateral area = 2πrh
Total area = 2πrh + 2πr2
SymbolMeaning
rRadius of the circular base
hHeight (or length) of the cylinder

How to Use This Calculator

  1. Choose the I know the (Radius, Diameter).
  2. Enter the Radius / diameter.
  3. Enter the Height (h).
  4. Press Calculate. Results also update automatically as you type.

Worked Example

Using the values pre-filled in the calculator above:

Inputs
I know theRadius
Radius / diameter3
Height (h)10
Results
Volume282.7433 cubic units
Lateral surface area188.4956 sq units
Total surface area245.0442 sq units
Base area28.2743 sq units

About This Calculation

A cylinder is a circle extruded along a straight line, so its volume is the area of the circular base multiplied by the height. The same principle — base area times height — works for any prism, and it holds even for an oblique (slanted) cylinder as long as you use the perpendicular height. The curved side, if unrolled, is a rectangle whose width is the circumference 2πr, giving the lateral area 2πrh.

The usual mistake is using the diameter where the formula needs the radius, which quadruples the volume. Choose "Diameter" above if that is what you measured. For hollow pipes, the volume of liquid inside depends on the internal diameter, while the material in the pipe wall is the difference between the outer and inner cylinders. Units must match: a radius in inches and a height in feet will give nonsense until you convert one of them.

Cylinder volumes are used constantly: the capacity of water tanks, rain barrels and hot-water cylinders, the amount of concrete in a round column or post hole, the fluid held in a length of pipe, and the size of cans and engine cylinders (engine displacement is the cylinder volume times the number of cylinders). One cubic foot is about 7.48 US gallons and 1,000 cm³ is a liter — the volume converter can help.

Frequently Asked Questions

How many gallons does a cylindrical tank hold?
Measure the inside radius and height in feet, compute the volume in cubic feet, then multiply by 7.48 for US gallons. A tank 3 ft in radius and 10 ft tall holds about 283 ft³ ≈ 2,115 gallons.
How do I calculate a partly filled horizontal tank?
That needs the circular-segment area of the liquid cross-section times the length. The sector area calculator gives the segment area for a given central angle.

Category: Geometry. Found a problem with this calculator? Let us know.