Electrical Power Calculator
Enter any two of power, voltage, current and resistance to find the other two. Useful for sizing fuses, cables, resistors and power supplies.
| Power | 1,200 W |
|---|---|
| Voltage | 120 V |
| Current | 10 A |
| Resistance | 12 Ω |
| Power in kilowatts | 1.2 kW |
Link to this calculation – copied!
Formula
I = P ÷ V, V = √(P × R), R = V2 ÷ P
| Symbol | Meaning |
|---|---|
| P | Power, in watts (W) |
| V | Voltage, in volts (V) |
| I | Current, in amperes (A) |
| R | Resistance, in ohms (Ω) |
How to Use This Calculator
- Choose the Known values (Voltage and current, Voltage and resistance, Current and resistance, Power and voltage, Power and current, Power and resistance).
- Enter the Power (W) when Known values is Power and voltage or Power and current or Power and resistance.
- Enter the Voltage (V).
- Enter the Current (A).
- Enter the Resistance (Ω) when Known values is Voltage and resistance or Current and resistance or Power and resistance.
- Press Calculate. Results also update automatically as you type.
Worked Example
Using the values pre-filled in the calculator above:
| Known values | Voltage and current |
|---|---|
| Voltage | 120 V |
| Current | 10 A |
| Power | 1,200 W |
|---|---|
| Voltage | 120 V |
| Current | 10 A |
| Resistance | 12 Ω |
| Power in kilowatts | 1.2 kW |
About This Calculation
Electrical power is the rate at which energy is delivered to a load, measured in watts. One watt is one joule per second, and in a DC circuit or a purely resistive AC load it equals voltage times current. Combining this with Ohm's law gives two more forms, P = I²R and P = V²/R, so knowing any two of the four quantities is enough to find the rest.
A typical use is checking a circuit's load. A 1,500 W space heater on a 120 V outlet draws 12.5 A, which is close to the limit of a 15 A household circuit once anything else is plugged in. On a 230 V supply the same heater draws only about 6.5 A, which is one reason higher-voltage systems use thinner cables for the same power.
The I²R form explains why cable losses rise quickly with current: doubling the current quadruples the heat in the wire. For AC motors, transformers and electronics with a power factor below 1, V × I gives apparent power in volt-amperes (VA); the real power in watts is lower by the power factor. To estimate running costs, multiply the kilowatt figure by hours of use and your tariff.
Frequently Asked Questions
- How many amps is 1,000 watts?
- Divide watts by volts: at 120 V it is about 8.3 A, and at 230 V about 4.3 A.
- What is the difference between watts and volt-amperes?
- Watts measure real power. Volt-amperes (VA) are simply volts times amps, which overstates the real power for loads such as motors whose current is out of phase with the voltage. The ratio between the two is the power factor.
- How do I work out what an appliance costs to run?
- Multiply its power in kilowatts by the hours it runs to get kilowatt-hours, then by your price per kWh. The electricity cost calculator does this for you.