Free online formula calculators

Ohm's Law Calculator

Solve Ohm's law for voltage, current or resistance from the other two values. The calculator also shows the power being dissipated.

Ohm's Law Calculator
V
Ω
Result
ResultCurrent = 0.5 A
Voltage12 V
Current0.5 A
Resistance24 Ω
Power6 W

Link to this calculation

Formula

V = I × R
I = V ÷ R
R = V ÷ I
P = V × I
SymbolMeaning
VVoltage across the component, in volts (V)
ICurrent through the component, in amperes (A)
RResistance, in ohms (Ω)
PPower dissipated, in watts (W)

How to Use This Calculator

  1. Choose the Solve for (Voltage (V), Current (I), Resistance (R)).
  2. Enter the Voltage (V).
  3. Enter the Current (A) when Solve for is Voltage (V) or Resistance (R).
  4. Enter the Resistance (Ω).
  5. Press Calculate. Results also update automatically as you type.

Worked Example

Using the values pre-filled in the calculator above:

Inputs
Solve forCurrent (I)
Voltage12 V
Resistance24 Ω
Results
ResultCurrent = 0.5 A
Voltage12 V
Current0.5 A
Resistance24 Ω
Power6 W

About This Calculation

Ohm's law, published by the German physicist Georg Simon Ohm in 1827, states that the current through a conductor is proportional to the voltage across it. The constant of proportionality is the resistance, so V = I × R. Doubling the voltage across a fixed resistor doubles the current; doubling the resistance at a fixed voltage halves it.

To use the calculator, choose which quantity you want and enter the other two. Keep units consistent: volts, amperes and ohms. If your current is in milliamps, divide by 1,000 first (20 mA = 0.02 A); if your resistance is in kilohms, multiply by 1,000 (4.7 kΩ = 4,700 Ω). The power figure tells you how much heat the component must get rid of, which matters when choosing a resistor's wattage rating.

Ohm's law holds well for resistors, wires and heating elements at a steady temperature. It does not describe diodes, LEDs, transistors or gas discharge lamps, whose current rises non-linearly with voltage. For AC circuits containing capacitors or inductors the same relationship applies using impedance instead of plain resistance.

Frequently Asked Questions

How do I remember the Ohm's law formulas?
Draw a triangle with V at the top and I and R side by side underneath. Cover the quantity you want: V leaves I × R, I leaves V over R, and R leaves V over I.
How much current flows through a 12 V, 24 Ω load?
I = 12 ÷ 24 = 0.5 A, and the load dissipates 12 × 0.5 = 6 W of power.
How do I find power as well?
Power is P = V × I. This calculator shows it automatically, and the electrical power calculator lets you solve from any two of power, voltage, current and resistance.

Category: Electrical & Engineering. Found a problem with this calculator? Let us know.