Parallel Resistor Calculator
Enter the resistances connected side by side and the voltage across them to get the equivalent resistance and how the current divides between branches.
| Equivalent resistance | 59.9768 Ω |
|---|---|
| Total current | 83.3656 mA |
| Total conductance | 16.6731 mS |
| Current per branch | 100 Ω: 50.00 mA; 220 Ω: 22.73 mA; 470 Ω: 10.64 mA |
Link to this calculation – copied!
Formula
Two resistors: Rtotal = (R1 × R2) ÷ (R1 + R2)
| Symbol | Meaning |
|---|---|
| Rtotal | Equivalent resistance, in ohms |
| Rk | Resistance of each branch |
| V | Voltage across the parallel group (the same for every branch) |
How to Use This Calculator
- Type or paste the Resistances (Ω). Separate values with commas or spaces.
- Enter the Voltage across the group (V).
- Press Calculate. Results also update automatically as you type.
Worked Example
Using the values pre-filled in the calculator above:
| Resistances | 100, 220, 470 |
|---|---|
| Voltage across the group | 5 V |
| Equivalent resistance | 59.9768 Ω |
|---|---|
| Total current | 83.3656 mA |
| Total conductance | 16.6731 mS |
| Current per branch | 100 Ω: 50.00 mA; 220 Ω: 22.73 mA; 470 Ω: 10.64 mA |
About This Calculation
Resistors are in parallel when both ends of each one connect to the same two nodes, so they all see the same voltage. Each branch offers the current another path, so the combined resistance is always lower than the smallest resistor in the group. The easiest way to think about it is in conductance (1/R, measured in siemens): conductances in parallel simply add.
For two resistors the "product over sum" shortcut works well: 100 Ω and 220 Ω in parallel give 22,000 ÷ 320 ≈ 68.75 Ω. Two equal resistors in parallel give half the value, three give a third, and so on. A very large resistor in parallel with a small one barely changes the total.
The current divides in inverse proportion to resistance, so the smallest resistor carries the most current and dissipates the most heat. Parallel combinations are used to obtain odd values, to share power across several low-wattage parts, and to model real loads such as household appliances, which are all wired in parallel across the mains so each receives the full supply voltage.
Frequently Asked Questions
- Why is the parallel resistance lower than every individual resistor?
- Each extra branch gives current another path, increasing the total conductance. More conductance means less resistance overall.
- What happens if one parallel resistor fails open?
- Its branch stops carrying current but the others keep working, and the equivalent resistance rises. This is why household outlets are wired in parallel.
- How do I combine series and parallel groups?
- Reduce each parallel group to its equivalent value here, then add the results with the series resistor calculator.