Free online formula calculators

Torque Calculator

Work out torque either from a force applied at a distance from the pivot, or from the power and speed of a rotating shaft such as an engine or motor.

Torque Calculator
N
m
°
Result
Torque80.00 N·m
Torque59.00 lb·ft
Torque8.158 kgf·m

Link to this calculation

Formula

τ = F × r × sin θ
τ = P ÷ ω = P × 60 ÷ (2π × n)
SymbolMeaning
τTorque, in newton-metres (N·m)
FApplied force, in newtons
rLever arm: distance from the pivot to where the force acts, in metres
θAngle between the lever arm and the force
PPower, in watts
ω, nAngular speed in rad/s, or rotational speed in rpm

How to Use This Calculator

  1. Choose the Calculate from (Force and lever arm, Power and speed).
  2. Enter the Force (N). 1 lbf ≈ 4.448 N; a 10 kg mass weighs about 98 N.
  3. Enter the Lever arm length (m).
  4. Enter the Angle between arm and force (°). 90° means pushing at right angles to the wrench.
  5. Enter the Power (kW) when Calculate from is Power and speed.
  6. Enter the Speed (rpm) when Calculate from is Power and speed.
  7. Press Calculate. Results also update automatically as you type.

Worked Example

Using the values pre-filled in the calculator above:

Inputs
Calculate fromForce and lever arm
Force200 N
Lever arm length0.4 m
Angle between arm and force90 °
Results
Torque80.00 N·m
Torque59.00 lb·ft
Torque8.158 kgf·m

About This Calculation

Torque is the turning effect of a force. It depends on how hard you push, how far from the pivot you push, and the direction of the push. Only the part of the force at right angles to the lever arm causes rotation, which is why the formula includes sin θ: pushing straight along a wrench handle (0°) produces no torque, while pushing at 90° produces the most. This is also why a longer breaker bar loosens a stubborn nut more easily.

The SI unit is the newton-metre. In the United States torque is usually quoted in pound-feet (1 lb·ft ≈ 1.356 N·m), and some older European and Asian manuals use kilogram-force metres (1 kgf·m = 9.80665 N·m). Typical values are 100–140 N·m for car wheel nuts, 10–25 N·m for spark plugs, and a few hundred N·m at the crankshaft of a family car engine.

For rotating machinery, torque and speed together determine power. A shaft delivering power P at angular speed ω carries a torque of P/ω, so the same power at a lower speed means more torque. That is the reason gearboxes trade speed for torque, and why electric motors, which produce strong torque from standstill, feel so responsive.

Frequently Asked Questions

Is torque the same as work, since both are N·m?
No. They share units but torque is a turning force, while work is energy transferred. Torque is never expressed in joules, which keeps the two distinct.
How do I convert N·m to lb·ft?
Divide by 1.3558. For example, 120 N·m ≈ 88.5 lb·ft. To go the other way, multiply lb·ft by 1.3558.
How is torque related to horsepower?
Power equals torque times rotational speed. The horsepower calculator converts engine torque and rpm into kW and hp.

Category: Electrical & Engineering. Found a problem with this calculator? Let us know.